Rockwell Automation Publication IASIMP-QS005H-EN-P - April 2016 11
Preface
About This Publication
This quick start provides a framework to develop safety applications. Each section guides you through the tasks that you
need to perform to design, program, and monitor your safety application.
To assist in the design and installation of your system, application files and other information are provided on the Safety
Ac
celerator Toolkit,
SAFETY-CL002. The DVD provides CAD drawings for components, wiring diagrams, logic
routines, and more. With these tools and the built-in best-practices design, you can focus on the design of your system
and not on design overhead tasks.
Each chapter begins with the following information. Read these sections carefully before you begin work in each chapter.
• Before You Begin - T
his section lists the steps that must be completed and decisions that must be made before you
start that chapter. The chapters in this quick start do not have to be completed in the order in which they appear,
but this section defines the minimum amount of preparation required before you complete the current chapter.
• What You Need
- This section lists the tools that are required to complete the steps in the current chapter. This
includes, but is not limited to, hardware and software.
• Follow These Steps - T
his illustrates the steps in the current chapter and identifies which steps are required to
complete the examples.
Software Requirements
You need these software to use this toolkit.
IMPORTANT Before you use this quick start and the CD, read the Terms and Conditions on the CD.
Rockwell Automation® Software Version
RSLogix 5000® 16 or later for 1756 GuardLogix® controllers
18 or later for 1768 GuardLogix controllers
Studio 5000® environment 28.00.00 or later for 5370 Compact GuardLogix controllers
FactoryTalk® View Machine Edition 6.1 or later
RSNetWorx™ for DeviceNet 9.1 or later for 1752-L24BBBE SmartGuard™ 600 controller
RSLinx® Classic 2.55 or later for 1756 and 1768 GuardLogix controllers
3.80 or later for 5370 Compact GuardLogix controllers
To Next Page
Loading...