184 Rockwell Automation Publication 750-TG100B-EN-P - June 2019
Chapter 8 Input Bay Components
2. Remove power from the system. See Remove Power from the System on
page 15
.
3. Open the input bay enclosure door.
4. Loosen the M5.5 x 13 mm torx screws that secure the guard to the
enclosure and remove the guard.
• 400 mm wide input bay guards require removal of six screws.
• 600 mm wide input bay guards require removal of six screws.
• 1000 mm wide input bay guards require removal of 28 screws.
Frame 8 Input Bay
4
M5.5 x 13 mm
T25
2.6 N
•m (23 lb•in)
Frame 9 Input Bay
To Next Page
Loading...
