EasyManuals Logo

Rockwell Automation Allen-Bradley PowerFlex 750 Series Service Manual

Rockwell Automation Allen-Bradley PowerFlex 750 Series
352 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #99 background imageLoading...
Page #99 background image
Rockwell Automation Publication 750-TG100B-EN-P - June 2019 99
Frame 7 Components Chapter 6
4. Loosen the two captive screws at the top of the control pod and pull the
cover out from the chassis.
5. Lift the bottom of the cover off the tabs and remove the cover.
Install the Control Pod Cover
Install the control pod cover in the reverse order of removal.
Control Pod Fan Assembly
Replacement
Replace the control pod fan assembly with kit catalog number
SK-RM-PODFAN-F7.
Remove the Control Pod Fan Assembly
Follow these steps to remove the control pod fan assembly.
1. Review the Product Advisories on page 14
.
2. Remove power from the system. See Remove Power from the System on
page 15
.
3. Open the enclosure door.
4
0.45 N
•m (4 lb•in)
4
The Control Pod Is Shown Separated from the
Power Bay to Clarify the Instructions Only.
=
5

Table of Contents

Other manuals for Rockwell Automation Allen-Bradley PowerFlex 750 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rockwell Automation Allen-Bradley PowerFlex 750 Series and is the answer not in the manual?

Rockwell Automation Allen-Bradley PowerFlex 750 Series Specifications

General IconGeneral
BrandRockwell Automation
ModelAllen-Bradley PowerFlex 750 Series
CategoryDC Drives
LanguageEnglish

Related product manuals