Rohde & Schwarz PR100 - Page 186

R&S PR100 User Manual
[SENSe]
. :FREQuency
. . :PSCan
. . . :SPAN <numeric_value>|MINimum|MAXimum
Setting the frequency span of an RF-panorama scan.This command uses
“SENS:FREQ:PSC:CENT?” to calculate new start and stop frequencies. It
thus changes SENS:FREQ:PSC:STAR and SENS:FREQ:PSC:STOP.
Parameters:
<numeric_value> frequency span
MINimum|MAXimum setting the lowest|highest frequency span
Example:
FREQuency:SPAN 2 MHz
[SENSe]
. :FREQuency
. . :PSCan
. . . :SPAN? [MINimum|MAXimum]
Query of the frequency span of an RF-panorama scan.
Parameters:
none query of current frequency span
MINimum|MAXimum query of lowest|highest frequency span
Result:
Frequency in Hz
Example:
FREQuency:SPAN? -> 2000000