Roland INTEGRA-7

Studio Set – CONTROL tab
12
EFFECTS ROUTING
1. In the top screen, press the [EFFECTS] button.
Motional surround : ONMotional surround : OFF
Parameter Value Explanation
MFX Switch OFF, ON
Species whether Multi-Eect will be used (ON) or not used (OFF).
* You can also set this in the tone MFX tab for each type.
Cho Send Level
(Also valid for the Ext part)
OFF, ON
Adjusts the amount of Chorus for each Part.
If you don’t want to add the Chorus eect, set it to 0.
* You can also set this in the LEVEL/CH tab of PART VIEW (p. 6).
* This is ignored if motional surround is on.
Rev Send Level
(Also valid for the Ext part)
OFF, ON
Adjusts the amount of Reverb for each Part.
If you don’t want to add the Reverb eect, set it to 0.
* You can also set this in the LEVEL/CH tab of PART VIEW (p. 6).
* This is ignored if motional surround is on.
Chorus Switch OFF, ON
Species whether chorus will be used (ON) or not used (OFF).
* This is ignored if motional surround is on.
Reverb Switch OFF, ON
Species whether Reverb will be used (ON) or not used (OFF).
* This is ignored if motional surround is on.
Master EQ Switch OFF, ON Switches the Master EQ on/o.
Comp+EQ Switch OFF, ON
Turns the six drum kit compressor + equalizer units on/o together.
* This is shown only if you’ve selected the part specied by Drum Comp+EQ Assign.