Roland INTEGRA-7

39
SuperNATURAL Drum Kit (SN-D)
TONE EDIT (SN-D)
Each kit has settings for 62 drum instruments, in addition to multi-eect (MFX) settings.
You can assign a dierent note number that will sound each of the 62 partials.
For the one part specied by the Drum Comp+EQ Assign setting, you’ll be able to use six sets of compressor + equalizer units to make the sound more
consistent or to adjust the tonal character.
MFX
DRUM INST
COMP+EQ 1 COMP+EQ 4
COMP+EQ 2
COMP+EQ 5
COMP+EQ 3 COMP+EQ 6
PARTIAL 1
PARTIAL 62
1. In the top screen, press the [EDIT] button.
Parameter Value Explanation
COMMON tab
Phrase Number 0–16 Number of the phrase that plays when you press the [VOLUME] knob (PREVIEW).
Drum Kit Level 0–127 Sets the volume of the entire drum kit.
Ambience Level 0–127
Species the volume of the drum kit resonances and the resonances of the room. This applies only
for sounds whose type is Kick, Snare, Tom, and Hi-Hat.
* For some drum instruments, this will have no eect. Refer to “SuperNATURAL Drum Inst List”
(p. 41).
DRUM INST tab
Inst Bank
INT,
ExSN6
(only if an expansion is loaded)
Selects the drum inst bank assigned to partial.
INT: Internal inst bank
ExSN6: Expanded inst bank
Inst Number 000: OFF, 001– Selects the drum inst number assigned to partial.
Level 0–127 Sets the volume of the drum inst.
Pan L64–63R Sets the pan of the drum inst.
Chorus Send Level 0–127
Species the level of the signal sent to the chorus for each drum inst.
* This has no eect if motional surround is on.
Reverb Send Level 0–127
Species the level of the signal sent to the reverb for each drum inst.
* This has no eect if motional surround is on.
Tune -120–+120 Adjusts the pitch of the drum inst.
Attack 0–100 [%] Adjusts the level and time of the attack. A setting of 100% produces the fastest attack.
Decay -63–0 Adjusts the decay time. Negative “-” settings will produce a muting eect.
Brilliance -15–+12
Adjusts the brilliance of the sound. Positive “+” settings make the sound brighter, and negative “-”
settings make the sound darker.
Variation
OFF, FLAM1, FLAM2, FLAM3, BUZZ1,
BUZZ2, BUZZ3, ROLL
Species performance variations such as am, buzz, or roll.
* The parameters available for editing will depend on the drum instrument. Refer to
“SuperNATURAL Drum Inst List” (p. 41).
Dynamic Range 0–63
Species the curve by which velocity will aect the volume. With a setting of 0, any velocity will
produce the maximum volume.
Stereo Width 0–127
Adjusts the stereo width of the sound. A setting of 0 is monaural.
* For some drum instruments, this will have no eect. Refer to “SuperNATURAL Drum Inst List”
(p. 41).