Roland INTEGRA-7

Studio Set – OFFSET tab
9
Parameter Value Explanation
Porta Time 0–127, TONE
When portamento is used, this species the time over which the pitch will change. Higher settings
will cause the pitch change to the next note to take more time. If you want to use the Portamento
Time setting of the tone assigned to the part, set this to “TONE.”
* This is not shown in PART VIEW -ALL-.
SN-A
(Ac.Piano)
SN-A
(Organ)
SN-A
(Other)
SN-S SN-D PCMS PCMD
ü
–
ü ü
–
ü
–
OFFSET tab
Cuto Oset -64–+63
Adjusts the cuto frequency for the tone/drum kit assigned to a part.
SN-A
(Ac.Piano)
SN-A
(Organ)
SN-A
(Other)
SN-S SN-D PCMS PCMD
– –
ü* ü
–
ü ü
* For some tones, the eect may be dicult to notice.
Reso Oset -64–+63
Adjusts the Resonance for the tone/drum kit assigned to a part.
SN-A
(Ac.Piano)
SN-A
(Organ)
SN-A
(Other)
SN-S SN-D PCMS PCMD
– –
ü* ü
–
ü ü
* For some tones, the eect may be dicult to notice.
Attack Oset -64–+63
Adjusts the Attack Time for the tone/drum kit assigned to a part.
SN-A
(Ac.Piano)
SN-A
(Organ)
SN-A
(Other)
SN-S SN-D PCMS PCMD
– –
ü ü
–
ü ü
Decay Oset -64–+63
Adjusts the Decay Time for the tone/drum kit assigned to a part.
SN-A
(Ac.Piano)
SN-A
(Organ)
SN-A
(Other)
SN-S SN-D PCMS PCMD
– – –
ü ü ü ü
Release Oset -64–+63
Adjusts the Release Time for the tone/drum kit assigned to a part.
SN-A
(Ac.Piano)
SN-A
(Organ)
SN-A
(Other)
SN-S SN-D PCMS PCMD
– –
ü ü ü ü ü
Vibrato Rate -64–+63
For each part, adjust the vibrato speed (the rate at which the pitch is modulated). The pitch will be
modulated more rapidly for higher settings, and more slowly with lower settings.
* This is not shown in PART VIEW -ALL-.
SN-A
(Ac.Piano)
SN-A
(Organ)
SN-A
(Other)
SN-S SN-D PCMS PCMD
ü
–
ü* ü
–
ü ü
* This eect does not apply to instruments of the Bell/Mallet and Percussion categories.
Vibrato Depth -64–+63
For each part, this adjusts the depth of the vibrato eect (the depth at which the pitch is modulated).
The pitch will be modulated more greatly for higher settings, and less with lower settings.
* This is not shown in PART VIEW -ALL-.
SN-A
(Ac.Piano)
SN-A
(Organ)
SN-A
(Other)
SN-S SN-D PCMS PCMD
ü
–
ü* ü
–
ü ü
* This eect does not apply to instruments of the Bell/Mallet and Percussion categories.
Vibrato Delay -64–+63
For each part, this adjusts the time delay until the vibrato (pitch modulation) eect begins. Higher settings
will produce a longer delay time before vibrato begins, while lower settings produce a shorter time.
* This is not shown in PART VIEW -ALL-.
SN-A
(Ac.Piano)
SN-A
(Organ)
SN-A
(Other)
SN-S SN-D PCMS PCMD
ü
–
ü* ü
–
ü ü
* This eect does not apply to instruments of the Bell/Mallet and Percussion categories.