Roland INTEGRA-7

PCM Synth Tone (PCMS) – TVF ENV tab
57
Parameter Value Explanation
Cuto Keyfollow -200–+200
Use this parameter if you want the cuto frequency to change according to the key that is pressed.
Relative to the cuto frequency at the C4 key (center C), positive “+” settings will cause the cuto
frequency to rise for notes higher than C4, and negative “-” settings will cause the cuto frequency
to fall for notes higher than C4.
Larger settings will produce greater change.
C4C3C2C1 C5 C6 C7
0
+50
+100
+200
-50
-100-200
o
-1
-2
+1
+2
Cuto frequency
(Octave)
Key
Cuto V-Curve FIXED, 1–7
Selects one of the following seven curves that determine how keyboard playing dynamics
(velocity) inuence the cuto frequency. Set this to “FIXED” if you don’t want the Cuto frequency
to be aected by the keyboard velocity.
1 2 3 4 5 6 7
Cuto V-Sens -63–+63
Use this parameter when changing the cuto frequency to be applied as a result of changes in
playing velocity. If you want strongly played notes to raise the cuto frequency, set this parameter
to positive “+” settings. If you want strongly played notes to lower the cuto frequency, use
negative “-” settings.
MEMO
To edit the overall tone while preserving the relative dierences in the Cuto V-Sens values set
for each partial, set the Velocity Sens Oset parameter (p. 48). However, this setting is shared by
the Level V-Sens parameter (p. 58).
Resonance V-Sens -63–+63
This allows keyboard velocity to modify the amount of Resonance. If you want strongly played
notes to have a greater Resonance eect, set this parameter to positive “+” settings. If you want
strongly played notes to have less Resonance, use negative “-” settings.
TVF ENV tab
TVF Env Depth -63–+63
Species the depth of the TVF envelope. Higher settings will cause the TVF envelope to produce
greater change. Negative “-” settings will invert the shape of the envelope.
TVF Env V-Curve FIXED, 1–7
Selects one of the following 7 curves that will determine how keyboard playing dynamics will
aect the TVF envelope. Set this to “FIXED” if you don’t want the TVF Envelope to be aected by
the keyboard velocity.
1 2 3 4 5 6 7
TVF Env V-Sens -63–+63
Species how keyboard playing dynamics will aect the depth of the TVF envelope. Positive
“+” settings will cause the TVF envelope to have a greater eect for strongly played notes, and
negative “-” settings will cause the eect to be less.
TVF Env T1 V-Sens -63–+63
This allows keyboard dynamics to aect the Time 1 of the TVF envelope. If you want Time 1 to be
speeded up for strongly played notes, set this parameter to a positive “+” value. If you want it to be
slowed down, set this to a negative “-” value.
TVF Env T4 V-Sens -63–+63
The parameter to use when you want key release speed to control the Time 4 value of the TVF
envelope. If you want Time 4 to be speeded up for quickly released notes, set this parameter to a
positive “+” value. If you want it to be slowed down, set this to a negative “-” value.