Roland INTEGRA-7

PCM Synth Tone (PCMS) – PITCH ENV tab
55
Parameter Value Explanation
Pitch Bend Range Up 0–+48
Species the degree of pitch change in semitones when the Pitch Bend lever is all the way right.
For example, if this parameter is set to “12,” the pitch will rise one octave when the pitch bend
lever is moved to the right-most position.
Pitch Bend Range Down 0–-48
Species the degree of pitch change in semitones when the Pitch Bend lever is all the way left. For
example if this is set to “-48” and you move the pitch bend lever all the way to the left, the pitch
will fall 4 octaves.
PITCH ENV tab
Pitch Env Depth -12–+12
Adjusts the eect of the Pitch Envelope. Higher settings will cause the pitch envelope to produce
greater change. Negative “-” settings will invert the shape of the envelope.
Pitch Env V-Sens -63–+63
Keyboard playing dynamics can be used to control the depth of the pitch envelope. If you want
the pitch envelope to have more eect for strongly played notes, set this parameter to a positive
“+” value. If you want the pitch envelope to have less eect for strongly played notes, set this to a
negative “-” value.
Pitch Env T1 V-Sens -63–+63
This allows keyboard dynamics to aect the Time 1 of the Pitch envelope. If you want Time 1 to be
speeded up for strongly played notes, set this parameter to a positive “+” value. If you want it to be
slowed down, set this to a negative “-” value.
Pitch Env T4 V-Sens -63–+63
Use this parameter when you want key release speed to aect the Time 4 value of the pitch
envelope. If you want Time 4 to be speeded up for quickly released notes, set this parameter to a
positive “+” value. If you want it to be slowed down, set this to a negative “-” value.
Pitch Env Time KF -100–+100
Use this setting if you want the pitch envelope times (Time 2–Time 4) to be aected by the
keyboard location. Based on the pitch envelope times for the C4 key, positive “+” settings will
cause notes higher than C4 to have increasingly shorter times, and negative “-” settings will cause
them to have increasingly longer times. Larger settings will produce greater change.
C4C3C2C1 C5 C6 C7
0
+50
+100
-50
-100
Key
Time
Pitch Env Time 1–4
0–127
Specify the pitch envelope times (Time 1–Time 4).
Higher settings will result in a longer time until the next pitch is reached. (For example, Time 2 is
the time over which the pitch changes from Level 1 to Level 2.)
* You can control this parameter using the Matrix Control.
T1 T2 T3 T4
L3
L4
L2
L1
L0
Note o
Pitch
Time
Note on
T: Time L: Level
Pitch Env Level 0–4 -63–+63
Specify the pitch envelope levels (Level 0–Level 4). It determines how much the pitch changes
from the reference pitch (the value set with Coarse Tune or Fine Tune on the Pitch screen) at each
point. Positive “+” settings will cause the pitch to be higher than the standard pitch, and negative
“-” settings will cause it to be lower.