Roland Jupiter-50 - Selecting a Sound for the Upper Part; Creating a Registration

15
Introduction Playing Sounds Editing Sounds
Other Convenient
Functions
Connecting Other
Equipment
Appendix
Quick Guide
Selecting a Sound for the Upper Part
1.
Press a Live Set button.
A Live Set will be selected.
2. Once again press the same
Live Set button.
A list of Live Sets will be
displayed.
3. Turn the value dial to select
a variation, and press the
[ENTER] button.
This allows you to select other
sounds of the selected category.
Live Set nameLive Set category
Creating a Registration
1.
Use the sound select buttons of each part to select the desired sound.
Percussion/Lower part
Upper part Solo part
2. Specify each part’s on/o status and volume setting.
3. If you want to make more detailed settings, press the [MENU] button [F1] (EDIT) button [F1] (REG) button.
The REGISTRATION screen will appear.
Main settings for the
Percussion/Lower Part
Main settings for
the Solo Part
Volume of the registration
Main settings for the
Upper Part
Access the each setting
screen
4. Move the cursor to the item that you want to edit, and use the value dial to edit it.
For more about registration editing, refer to “Editing a Registration” (p. 54).
Use the sliders to adjust
the volume of each Part.
Turn each Part on/o.