Roland M-480 - Other settings and functions; System Information and Basic Mixer Settings

113
DCA groups
DCA groups
Assigning a channel to a DCA group
The DCA GROUP ASSIGN popup is used to assign a channel to a
DCA group.
You can also use the DCA/MUTE GROUP ASSIGN popup of the
CHANNEL DISPLAY screen to assign a channel to a DCA group.
For details, refer to “Assigning a channel to a DCA group” (p. 55).
1. In the GROUP section, press [DCA] to access the DCA
GROUP screen.
2.
Move the cursor to the DCA group fader of the desired
DCA group, and press [F8 (ASSIGN)].
fig.ScrDCAGroupAssignGuide.eps
The DCA GROUP ASSIGN popup will appear.
Target DCA group indication
This indicates the DCA group to which the settings in the
DCA GROUP ASSIGN popup will apply.
Channel select buttons
Here you can select the channels that will be assigned to the
DCA group.
The function buttons have the following operations:
1. Access the DCA GROUP ASSIGN popup for the desired
DCA group.
fig.ScrDCAGroupAssign.eps
2.
Verify that the target DCA group is correct.
3.
Move the cursor to the desired channel select button,
and press [ENTER] to select it.
4.
Press [F8 (CLOSE)] to close the popup.
When the DCA GROUP ASSIGN popup is displayed, you can
press a top panel [SEL] to turn on/off the corresponding
channel’s assignment to the DCA group.
Accessing the DCA GROUP ASSIGN
popup
2
1
1
2
[F1 (CH 1–48)]
Displays CH1–48 as the channel select buttons.
[F2 (RTN 1–6)] Displays RTN1–6 as the channel select buttons.
[F3 (AUX/MTX/MAIN)] Displays AUX1–16, MTX1–8, and MAIN L/R/C as
the channel select buttons.
[F8 (CLOSE)] Closes the popup.
Assigning a channel to a DCA group
Specifying a name and color label for the DCA group
You can specify a name and color label for each DCA group. A
name of up to six characters can be specified, and you can
choose one of eight colors as the color label.
The NAME EDIT popup is used to edit the name and select a color
label.
1.
Access the DCA GROUP screen.
2.
Move the cursor to the DCA group fader of the desired
DCA group, and press [F7 (NAME EDIT)].
The NAME EDIT popup will appear.
For details on name editing, refer to “Editing the channel name”
(p. 52).
Accessing the NAME EDIT popup
M-480_e.book 113 ページ ２０１１年３月２日 水曜日 午前９時２０分