172
Management of the M-48 live personal mixer
Management of the M-48 live personal mixer
Each musician will be able to use their M-48 with greater comfort and convenience if the mixing engineer has made the appropriate
settings for each M-48. In particular, the mixing engineer should consult with each musician when assigning sources to groups. Each
musician can decide what sources they want assigned to which knobs (groups).
The following settings are made by the mixing engineer:
The following settings and management functionality for the M-48 are also provided:
The M-48’s settings are stored in each M-48 unit itself. The M-480 can load and manage the settings of each connected M-48 unit.
There are two ways to store the M-48’s settings on an external device:
• Store the settings in the M-480’s M-48 library (p. 188)
• Save the settings to USB memory (p. 190)
Editing and managing M-48 units
Setting
Page Screen
Specifying the outputs from the M-480 to the M-48 unit
p. 173
PATCHBAY screen
Editing the M-48’s unit name
p. 175
M-48 MANAGER popup
Making preference settings for an M-48 unit
p. 177
M-48 PREFERENCES popup
Source Level/Pan settings
p. 178
M-48 SOURCE LEV/PAN popup
Source Assign settings
p. 181
M-48 SOURCE ASSIGN popup
Function
Page Screen
Viewing the connected M-48 units
p. 174
M-48 MANAGER popup
Muting the output of an M-48 unit
p. 175
Disabling memory operations from the M-480 (MEMORY SAFE function) p. 175
Using the Engineer’s Monitor function p. 184
Checking and adjusting the musician’s mix (Group Mix) p. 182
M-48 GROUP MIX popup
Copying M-48 settings
p. 185
M-48 COPY popup
M-48 memory operations p. 186
M-48 MEMORY popup
Using the M-48 library p. 188
M-48 LIBRARY popup
Saving/loading USB memory p. 188
M-48 LOAD/SAVE popup
Linking scene memories to M-48 memories p. 126
SCENE screen
Where the settings are stored
M-480_e.book 172 ページ ２０１１年３月２日 水曜日 午前９時２０分
To Next Page
Loading...
