123
Scene memory
Scene memory
The RECALL PARAMETERS select buttons consist of the
following items:
The function buttons have the following operations:
3.
Press [F1 (RECALL FILTER)] to turn it on.
4.
Use the RECALL PARAMETERS select buttons to add a
check mark to the parameters that you want to recall.
5.
Press [F8 (OK)] to finalize the changes and close the
popup.
Pressing [F7 (CANCEL)] will cancel the operation.
1.
Access the SCENE screen.
2.
Select the desired scene from the scene list.
3.
Press [F7 (LOCK)] to lock or unlock the scene.
While carrying out other operations, you can temporary display
the scene list and perform scene memory operations.
1.
Hold down [SHIFT] and press [DISP] in the SCENE
MEMORY section.
fig.ScrSceneQView_Guide.eps
The SCENE QUICKVIEW popup will appear.
Scene list
This lists the scenes. The current scene is shown in green.
The items listed are the same as for the SCENE screen.
The function buttons have the following operations:
You can also make the setting for accessing the popup from a
USER button (p. 140).
Item
Explanation
INPUT PATCH
Input patchbay setting
OUTPUT PATCH Output patchbay settings
PREAMP Preamp settings
(gain +48V phantom power, pad)
CH1–48
RTN 1–6
Input channel settings
BUS AUX, MTX, and MAIN settings
EFFECTS Effect and external effect insertion settings
DCA/MUTE GROUP DCA group and MUTE group settings
RECORDER USB memory recorder settings
TALKBACK/OSC Talkback and oscillator settings
[F1 (RECALL FILTER)] Turns the recall filter on/off.
[F7 (CANCEL)] Cancels the changes and closes the popup.
[F8 (OK)] Finalizes the changes and closes the popup.
Locking/Unlocking a scene
Momentarily displaying the scene list
[F1 (RECALL)]
This recalls the mixer parameters from the
currently selected scene number.
[F2 (STORE)] This stores the current mixer parameters into
the currently selected scene number.
[F4 (CLEAR)] Clears the contents of the scene selected in the
scene list, making it a blank scene (p. 125).
[F6 (LOCK)] Locks or unlocks the scene selected in the
scene list.
[F7 (UNDO RECALL)] Undoes (cancels) the last-performed recall.
[F8 (CLOSE)] Closes the popup.
1
1
M-480_e.book 123 ページ ２０１１年３月２日 水曜日 午前９時２０分
To Next Page
Loading...
Need help?
General
