Roland M-480 - Rear Panel Connectivity and Switches

26
Explanation of the panels
Explanation of the panels
fig.RecorderSectGuide.eps
[ ] / [ ] button
Here you can select the song to play, and rewind or fast-
forward the playback.
• Selecting a song
By pressing these buttons, you can jump to the beginning of
the preceding or following song. During playback, [ ]
takes you back to the beginning of the playing song.
• Rewinding or fast-forwarding during playback
By pressing and holding these buttons while a song is
playing, you can rewind or fast-forward. Normal playback
will resume when you release the button.
[ ] button
Use this button to start or stop playback, or to start
recording.
• Playing a song
When you press this button while the recorder is stopped,
the currently selected song will play.
• Stopping a song
When you press this button while the song is playing,
playback will stop.
• Starting recording
When you press this button in recording-standby mode,
recording will start.
• Stopping recording
When you press this button while recording a song,
recording will stop.
REC button
Use this button to put the recorder in recording-standby
mode, or to divide the song currently being recorded.
• Recording-standby mode
When you press this button while the recorder is stopped,
the recorder will enter recording-standby mode. Press
[ ] to start recording.
• Dividing the song currently being recorded
When you press this button while a song is being recorded,
recording of the song currently being recorded will be
completed, and recording of a new song will begin.
[DISP] button
This button accesses the RECORDER screen where you can
make recorder settings and manage the song list. It will light
red when the screen is shown.
fig.SetupSectGuide.eps
[PATCHBAY] button
This button accesses the PATCHBAY screen where you can
make settings for the input/output patchbay. It will light red
while the screen is shown.
[SYSTEM] button
This button accesses the SYSTEM screen where you can
make various system settings. It will light red when the
screen is shown.
fig.GroupSectGuide.eps
[DCA] button
This button accesses the DCA GROUP screen where you can
control the DCA groups and make settings for them. It will
light red when the screen is shown.
[MUTE] button
This button accesses the MUTE GROUP screen where you can
control the mute groups and make settings for them. It will
light red when the screen is shown.
USB MEMORY RECORDER section
10
1
2
3
4
1
2
3
4
SETUP section
GROUP section
11
1
2
1
2
12
1
2
1
2
1
2
M-480_e.book 26 ページ ２０１１年３月２日 水曜日 午前９時２０分