192
Appendix
Appendix
User button functions
FUNCTION
PARAM1 PARAM2 LED Explanation
NONE
- - Unlit
SCENE PREV RECALL - Lit while held Recalls the scene of the previous number
NEXT RECALL - Lit while held Recalls the scene of the next number
DIRECT RECALL 000–299 Lit while held Recalls the scene of the specified number
UNDO RECALL - Lit if UNDO is available Cancels the scene recall
PREV - Lit while held Moves to the previous scene number
NEXT - Lit while held Moves to the next scene number
RECALL - Lit while held Recalls the scene of the current number
STORE - Lit while held Stores the scene of the current number
SCENE QUICKVIEW - Lit when the specified
screen is displayed
Accesses the SCENE QUICK VIEW popup (p. 123).
OSCILLATOR OSC 1 ON - ON: lit, OFF: unlit Oscillator on/off
OSC 2 ON
MONITOR SOURCE SELECT AUX1–16, MTX1–8,
MAIN LR, MAIN C,
MAIN MONO, MAIN
LCR, REC OUT LR
Lit if assignment is identical Changes the monitor source to the specified source
M-48 MANAGER - Lit when the specified
screen is displayed
Accesses the M-48 MANAGER popup (p. 174)
M-48 SETUP 1–64 Lit when the specified
screen is displayed
Accesses the M-48 SETUP popup (p. 176)
(PARAM2 specifies the number in the M-48 list.)
EFFECT BYPASS FX FX1 L–FX6 R ON: lit, OFF: unlit Turns Bypass on/off for the specified FX
BYPASS GEQ GEQ1–GEQ12 ON: lit, OFF: unlit Turns Bypass on/off for the specified GEQ
EDIT FX FX1–FX6 Lit when the specified
screen is displayed
Accesses the FX EDIT popup (p. 101)
EDIT GEQ GEQ1–GEQ12,
FX1 GEQ A–FX6 GEQ B
Lit when the specified
screen is displayed
Accesses the GEQ EDIT popup (p. 106) or FX EDIT
popup.
TAP TEMPO Blinks in time with the
tempo
Setting the tempo (p. 103)
MUTE GROUP 1–8 ON: lit, OFF: unlit Turns the specified mute group on/off
METER PEAK CLEAR - Lit while held Clears the meter peak hold and Over indications
CHANGE METER POINT CH, BUS Lit while held The level detection point of the specified meter will be
changed each time you press the button.
CH SELECT PREVIOUS - Lit while held Selects the channel that precedes the current channel
NEXT - Lit while held Selects the channel that follows the current channel
CH EDIT +48V SW - Lit while held While the button is held, [SEL] operates as an ON/OFF
switch
PAD SW - Lit while held While the button is held, [SEL] operates as an ON/OFF
switch
PHASE SW - Lit while held While the button is held, [SEL] operates as an ON/OFF
switch
GATE SW - Lit while held While the button is held, [SEL] operates as an ON/OFF
switch
COMP SW - Lit while held While the button is held, [SEL] operates as an ON/OFF
switch
SET UNITY - Lit while held Hold down the button and press [SEL] to set the fader
of the corresponding channel to 0.0 dB
RECORDER PREV SONG - Unlit Selects the previous WAV file
NEXT SONG - Unlit Selects the next WAV file
PLAY/STOP - During playback/
recording: lit
Plays the selected WAV file
REC - During recording: lit,
during recording standby:
blink
Puts the USB memory recorder into recording standby
MUTE MAIN L/R - ON: lit, OFF: unlit Turns the specified mute on/off.
MAIN C
M-480_e.book 192 ページ ２０１１年３月２日 水曜日 午前９時２０分
To Next Page
Loading...
