Roland M-480 - BUS Parameter Adjustments

56
AUX, MTX, MAIN operations
AUX, MTX, MAIN operations
The AUX and MAIN process the mixed audio signals from the input channels, and send them to the output ports. MTX (MATRIX) process a
mix of the audio signals from input channels, AUX, and MAIN, and send them to an output ports.
fig.OutBlkDia.eps
About AUX, MTX, MAIN
MAIN
LRC LR
SOLOAUX
12 1615
MAIN
LRC LR
SOLOAUX
12 1516
MTX
12 78
MTX
12 78
FROM AUX 1–16
CASCADE OUT ATT
CASCADE OUT ATT
CASCADE OUT ATT
FROM AUX 1–16, MAIN L, R, C
AT T
Post ATT Pre EQ Pre FADER Post FADER Post LIMITER
MUTE
FADER
BAL
GEQ
INSERT
MAIN L, R, C OUT
OUTPUT
PATCHBAY
TO SOLO
TO MONITOR SELECT
TO REC SELECT
TO MONO MIX
LIMITER DELAY
SOLO
MAIN L, R, C
PRE EQ
PRE FADER
POST FADER
MTX SEND 1–8
TO MTX 1, 3...7
TO MTX 2, 4...8
SW SEND
MTX
LINK
PA N
SW SEND
INSERT
EXT
FX
4-BAND
EQ
AFL SW
Post DELAY
TO MAIN L
TO MAIN R
TO MAIN C
MAIN SEND
PA N
PA N
(LCR)
LR SW
MAIN SW
CENTER
C SW
LCR
MONO OUT
MONO
MIX
L
R
C
AT T
Post ATT Pre EQ Pre FADER Post FADER Post LIMITER
MUTE
FADER
BAL
GEQ
INSERT
AUX 1–16 OUT
TO SOLO
TO MONITOR SELECT
TO REC SELECT
TO FX INPUT SELECT
LIMITER DELAY
SOLO
AUX 1–16
PRE EQ
PRE FADER
POST FADER
MTX SEND 1–8
TO MTX 1, 3...7
TO MTX 2, 4...8
SW SEND
MTX
LINK
PA N
SW SEND
INSERT
EXT
FX
4-BAND
EQ
AFL SW
Post DELAY
AT T
Post ATT Pre EQ Pre FADER Post FADER Post LIMITER
MUTE
FADER
BAL
GEQ
INSERT
MTX 1–8 OUT
TO SOLO
TO MONITOR SELECT
TO REC SELECT
LIMITER DELAY
SOLO
MTX 1–8
INSERT
EXT
FX
4-BAND
EQ
AFL SW
Post DELAY
• ATT (Attenuator)
This adjusts the input level.
• EXT FX INSERT (External Effect insert)
These ports let you use the rear panel CONSOLE IN1–8 and
CONSOLE OUT1–8 ports to insert external effects processors.
• FX INSERT (Effect insert)
These ports let you insert FX1–6.
• 4-BAND EQ
This is an EQ with four bands.
• FADER
This adjusts the output level.
• BALANCE
This adjusts the left/right balance for MAIN L/R or for stereo-
linked AUX/MTX buses.
• MUTE
This mutes the output of the channel. The post fader sends
to the MAIN L/R bus and AUX buses will also be muted.
• LIMITER
This limits the output level.
• MAIN SEND (AUX1–8 only)
This adjusts the send to MAIN.
• MTX SEND (MATRIX send)
This adjusts the send to MTX1–8.
• DELAY
This delays the output signal.
• φ ( Phase)
This reverses the phase of the audio signal.
M-480_e.book 56 ページ ２０１１年３月２日 水曜日 午前９時２０分