Roland M-480 - Specifying a Name and Color Label for a Mute Group

115
Mute groups
Mute groups
The function buttons have the following operations:
3.
Move the cursor to the desired channel select button,
and press [ENTER] to select it.
4. Press [F8 (CLOSE)] to close the popup.
When the MUTE GROUP ASSIGN popup is displayed, you can
press a top panel [SEL] to turn on/off the corresponding
channel’s assignment to the mute group.
1.
Access the MUTE GROUP screen.
fig.ScrMUTEGroup.eps
2. Move the cursor to the desired mute group button, and
press [ENTER] to turn it on/off.
You can also make the setting for switching MUTE groups on or
off from a USER button (p. 140).
[F1 (CH 1–48)]
Displays CH1–48 as the channel select buttons.
[F2 (RTN 1–6)] Displays RTN1–6 as the channel select buttons.
[F3 (AUX/MTX/MAIN)] Displays AUX1–16, MTX1–8, and MAIN L/R/C as
the channel select buttons.
[F8 (CLOSE)] Closes the popup.
Using mute groups
Specifying a name and color label for a mute group
You can specify a name and color label for each mute group. A
name of up to six characters can be specified, and you can
choose one of eight colors as the color label.
The NAME EDIT popup is used to edit the name and select a color
label.
1.
Access the MUTE GROUP screen.
2.
Move the cursor to the MUTE group button of the desired
mute group, and press [F7 (NAME EDIT)].
The NAME EDIT popup will appear.
For details on name editing, refer to “Editing the channel name”
(p. 52).
Accessing the NAME EDIT popup
M-480_e.book 115 ページ ２０１１年３月２日 水曜日 午前９時２０分