Roland M-480 - Using the M-48 Library

188
Management of the M-48 live personal mixer
Management of the M-48 live personal mixer
Using the M-48 library
The current settings of the M-48 can be organized in the form of a
“Library,” and saved on the M-480.
1.
Access the M-48 MANAGER popup.
fig.ScrM48Manager.eps
2.
In the M-48 list, move the cursor to the desired M-48 unit
and press [F4 (LIBRARY)].
ig.ScrM48Library_Guide.eps
The M-48 LIBRARY popup will appear.
Target unit indication
This indicates the M-48 unit to which operations in the M-48
LIBRARY popup will apply.
Library list
This lists the library items for the target M-48.
The following items are shown in the list:
Recall parameter select buttons
These buttons select the parameters that will be recalled
from the library. Parameters with a check mark will be
recalled.
The function buttons have the following operations:
* Cannot be used if the selected library item is locked.
1.
Access the M-48 LIBRARY popup.
2.
In the library list, select the store-destination number.
3.
Press [F5 (STORE)].
fig.ScrM48LibStore.eps
The LIBRARY STORE popup will appear.
4.
Edit the name in the name edit field, and press
[F8 (STORE)].
fig.ScrM48LibStore_Conf.eps
A message will ask you to confirm the operation.
5.
Press [F8 (STORE)]; the store operation will be executed,
and a status message will indicate the progress of the
operation.
When the store operation is completed, the message will
disappear.
Pressing [F7 (CANCEL)] will cancel the operation.
The confirmation message in step 4 will not appear if the user
preference CONFIRMATION select button “SCENE/LIB STORE” is
unchecked.
Accessing the M-48 LIBRARY popup
NO.
Indicates the library item number.
NAME Indicates the library item name.
STATUS This will indicate LOCK if the library item is locked.
SOURCE LEV/PAN Source level/pan settings
SOURCE ASSIGN Group assign settings
PREFERENCES Preference settings
GROUP MIX Group mix
2
1
3
1
2
3
[F3 (NAME EDIT)]
*
Accesses the NAME EDIT popup, where you can
edit the name of a library item.
[F4 (RECALL)] Recalls the library item selected in the list (p.
189).
[F5 (STORE)]
*
Accesses the LIBRARY STORE popup, where
you can store to the library item selected in the
list (p. 188).
[F6 (CLEAR)]
*
Clears the library item selected in the list (p.
189).
[F7 (LOCK)] Locks/unlocks the library item selected in the
list.
[F8 (CLOSE)] Closes the popup.
Storing to the M-48 library
M-480_e.book 188 ページ ２０１１年３月２日 水曜日 午前９時２０分