EasyManua.ls Logo

Roland M-480 - M-48 Memory Operations

Roland M-480
229 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
186
Management of the M-48 live personal mixer
Management of the M-48 live personal mixer
3.
Verify that the copy-source unit indication shows the
desired M-48 unit.
If the wrong copy-source unit is selected, press [F8 (CLOSE)]
to close the popup, return to step 2, and select the desired
copy source.
4.
In the copy-destination list, add a check mark to the
desired copy-destination M-48 units.
Press [ENTER] to assign or clear a check mark.
You can use [F1 (MARK ALL)] or [F2 (CLEAR MARKS)] to assign or
clear check marks for all DEST fields in the copy-destination list.
5.
Use the copy parameter select buttons to select the
parameters that you want to copy.
6.
Press [F5 (PASTE)].
fig.ScrM48Copy_Conf.eps
A message will ask you to confirm the operation.
7.
Press [F8 (PASTE)].
The copy will be executed, and a message indicating the
processing status will appear. This message will close when
copying is completed.
Pressing [F7 (CANCEL)] will cancel the operation.
M-48 memory operations
You manipulate M-48 memory using the M-48 MEMORY popup.
1.
Access the M-48 MANAGER popup.
fig.ScrM48Manager.eps
2.
In the M-48 list, move the cursor to the desired M-48
MEMORY NO., and press [ENTER].
The M-48 MEMORY popup will appear.
There are two views: the SELECTED UNIT tab and the ALL
UNITS tab.
SELECTED UNIT tab
fig.ScrM48Memory.eps
In this tab you can manipulate the memories of the M-48
unit that is selected in the M-48 list.
ALL UNITS tab
fig.ScrM48MemoryAll.eps
In this tab you can manipulate the memories of all M-48
units (except for units whose MEMORY SAFE function is on).
fig.ScrM48Memory_Guide.eps
Target unit indication
This indicates the M-48 that is the target of memory
operations.
Memory list
This lists the memories of the target M-48 unit. The current
memory number is shown in green.
The list shows the following items:
* This is not shown in the ALL UNITS tab.
Accessing the M-48 MEMORY popup
NO.
Indicates the memory number.
NAME Indicates the memory name.
*
2
1
1
2
M-480_e.book 186 ページ 2011年3月2日 水曜日 午前9時20分

Table of Contents

Other manuals for Roland M-480

Related product manuals