Roland M-480 - Channel Strip

211
Appendix
Appendix
Channel strip
fig.AlgoDualChStrip.eps
This is a dual-mono channel strip. It provides gate, compressor,
enhancer/de-esser, EQ, and delay.
GATE/EXPANDER A/B
GATE SW (GATE switch)
Turns the gate on/off
Value: OFF, ON
MODE (Gate mode)
Value: GATE, EXPANDER, DUCKING
THRE (Threshold level)
Threshold level
Value: -80.0–0.0 dB
RATIO
Expander ratio
Value: 1.00:1–INF:1
KNEE
Expander knee
Value: HARD, SOFT1–SOFT9
RANGE
Range of GATE or DUCKING
Value: -Inf–0.0 dB
ATK (Attack time)
Attack time
Value: 0.0–800.0 ms
REL (Release time)
Release time
Value: 0–8000 ms
HOLD (Hold time)
GATE or DUCKING hold time
Value: 0–8000 ms
COMPRESSOR A/B
COMP SW (Compressor switch)
Turns the compressor on/off
Value: OFF, ON
THRE (Threshold level)
Threshold level of the compressor
Value: -40.0–0.0 dB
RATIO
Compression ratio
Value: 1.00:1–INF:1
KNEE
Compressor knee
Value: HARD, SOFT1–SOFT9
ATK (Attack time)
Compressor attack time
Value: 0.0–800 ms
REL (Release time)
Compressor release time
Value: 0–8000 ms
GAIN
Compressor gain
Value: -40.0–+40.0 dB
AUTO GAIN
Turns compressor auto gain on/off
Value: OFF, ON
ENHANCER/DE-ESSER A/B
ENHANCER/DE-ESSER SW
(Enhancer/De-esser switch)
Turns the enhancer/de-esser on/off
Value: OFF, ON
MODE (Gate mode)
Value
ENHANCER: Enhances the harmonic content of the
sound, giving the sound greater clarity. If
the high-frequency region is weak, it will be
strengthened. The DE-ESSER threshold
setting is not used
DE-ESSER: Restrains the sibilants, softening the sound.
If the high-frequency region is excessive, it
will be moderated. The ENHANCER
sensitivity and ENHANCER mix level are not
used.
CH STRIP x2 (Channel Strip x2)
Input A
Gate Compressor
Enhancer/
De-esser
Output A
4 Band EQ
Delay
Input B
Gate Compressor
Enhancer/
De-esser
Output B
4 Band EQ
Delay
M-480_e.book 211 ページ ２０１１年３月２日 水曜日 午前９時２０分