Roland M-480 - Limiting the Range of Possible Operations

137
User settings
User settings
Limiting the range of possible operations
You can limit the range of operations that are possible by editing
the user levels to correspond to the user settings.
You edit the user level at the USER LEVEL popup.
1.
Access the USER screen.
fig.ScrUser.eps
2.
From the user list, select the desired user.
You can’t specify the user level for ADMIN.
3. Press [F5 (USER LEVEL)].
The USER LEVEL popup will appear.
This has four tabs: CH 1–48, RTN 1–6, AUX/MTX/MAIN and
OTHER.
● CH 1–48, RTN 1–6, AUX/MTX/MAIN tabs
fig.ScrUserAccessGuide.eps
Applicable user indication
This indicates the user settings to which the USER LEVEL
popup applies.
ADMIN button
Select this option if you want to give ADMIN privileges to the
user.
Parameter access permission buttons
These buttons select the parameters that the user will be
able to operate for the channels selected by the channel
access permission buttons. The parameters that are selected
here will be operable.
The parameter access permission buttons correspond to the
following parameters:
• For CH1–48 and RTN 1–6
*: CH 1–48 only.
• For AUX/MTX/MAIN
Channel access permission buttons
These buttons select the channels that the user will be able
to operate. The channels that are selected here will be
operable.
Accessing the USER LEVEL popup
2
1
3
4
1
2
Item
Explanation
Preamp
Preamp gain, pad, and +48V phantom power
Phase Phase
ATT Attenuator
HPF* High-pass filter
Gate* Gate/Expander
Comp* Compressor
Delay Delay
EQ* 4-band EQ
Fader Faders
Pan Pan
LCR LCR button, CENTER
Send AUX/MTX sends
Direct Direct out point
Mute Mute
To MAIN MAIN send
Item
Setting
ATT
Attenuator
EQ 4-band EQ
Fader Faders
Balance Balance
LCR LCR button, CENTER
Phase Phase
Limiter Limiter
Delay Delay
MTX Send MTX sends
Mute Mute
To MAIN MAIN send
3
4
M-480_e.book 137 ページ ２０１１年３月２日 水曜日 午前９時２０分