EasyManua.ls Logo

Roland M-480 - M-48 Memory Operations

Roland M-480
229 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
138
User settings
User settings
OTHER tab
fig.ScrUserAccessOthGuide.eps
Other parameter access permission buttons
These buttons select other parameters that the user will be
able to operate. The parameters that are selected here will
be operable.
The “TALKBACK/OSC” button in the OTHER PARAMETER ACCESS
PERMISSION section enables or disables operation of the
talkback/oscillator output-destination select button (p. 117).
The function buttons have the following operations:
The USER LEVEL popup is used to edit the user level.
You can’t specify the user level for ADMIN.
1.
Access the USER screen.
fig.ScrUser.eps
2.
From the user list, select the desired user.
3.
Press [F5 (USER LEVEL)].
fig.ScrUserAccess.eps
4.
Use the ADMIN button to specify whether the user will
have ADMIN privileges.
5.
Use [F1 (CH 1–48)] and [F2 (RTN 1–6)] to access the CH 1–
48 tab and RTN 1–6 tab, and specify the channels and
parameters to which the user will have access.
6.
Press [F3 (AUX/MTX/MAIN)] to access the AUX/MTX/MAIN
tab, and specify the channels and parameters to which
the user will have access.
7.
Press [F4 (OTHER)] to access the OTHER tab, and specify
the parameters to which the user will have access.
8.
Press [F8 (OK)] to finalize the changes and close the
popup.
Pressing [F7 (CANCEL)] will cancel the operation.
[F1 (CH 1–48)]
Accesses the CH 1–48 tab.
[F2 (RTN 1–6)] Accesses the RTN 1–6 tab.
[F3 (AUX/MTX/MAIN)] Accesses the AUX/MTX/MAIN tab.
[F4 (OTHER)] Accesses the OTHER tab.
[F7 (CANCEL)] Cancels the changes and closes the popup.
[F8 (OK)] Confirms the changes and closes the popup.
Editing the user level
5
5
If a user who does not have ADMIN privileges attempts to
access the USER LEVEL popup, an ENTER PASSWORD popup
will appear, requesting that the ADMIN password be
entered.
Enter the ADMIN password and press [F8 (OK)] to access
the USER LEVEL popup, where you can edit the user
level.
If you press [F7 (CANCEL], the USER LEVEL popup will
appear in view-only mode. In view-only mode you can’t
edit the user level.
M-480_e.book 138 ページ 2011年3月2日 水曜日 午前9時20分

Table of Contents

Other manuals for Roland M-480

Related product manuals