75
Dynamics
Dynamics
1.
Access the GATE EXPANDER popup.
fig.PopGate.eps
2.
Press [F1 (OVERVIEW)] to access the GATE/EXPANDER
OVERVIEW popup.
fig.ScrGateOverview.eps
This shows the overall gate/expander status for CH1–
48
.
fig.ScrGateOverviewGuide2.eps
Channel number
ON button
This turns the gate/expander on/off.
Type indication
This indicates the currently selected type.
Gate/expander graph
This shows the approximate response of the gate/expander.
GR (Gain Reduction) meter
This shows the amount of gain reduction for the gate/
expander.
THR knob
This adjusts the threshold level of the gate/expander in a
range of -80.0 dB–0.0 dB.
The function buttons have the following operations:
You can recall gate/expander settings from the library, or store
the current gate/expander settings in the library.
The GATE/EXP LIBRARY popup is used to perform gate/expander
library operations.
1.
Access the GATE/EXPANDER popup.
2.
Press [F4 (LIBRARY)] to access the GATE/EXP LIBRARY
popup.
fig.PopGateLibGuide.eps
Channel indication
This indicates the channel to which the GATE/EXPANDER
LIBRARY popup applies.
Library data list
This is a list of the library data.
The function buttons have the following operations:
For details on library operations, refer to “Library operations” (p.
39).
Listing the GATE/EXPANDER states
1
2
3
5
4
6
1
2
3
4
5
6
[F8 (CLOSE)]
Closes the popup.
Using the gate/expander library
[F2 (PREVIEW)]
Previews (auditions) the library data that is
selected in the list.
[F3 (NAME EDIT)] Accesses the NAME EDIT popup.
[F4 (RECALL)] Recalls the selected library data.
[F5 (STORE)] Stores the current settings into the selected
library data.
[F6 (CLEAR)] Clears the selected library data.
[F7 (LOCK)] Locks/unlocks the selected library data.
[F8 (CLOSE)] Closes the popup.
2
1
1
2
M-480_e.book 75 ページ ２０１１年３月２日 水曜日 午前９時２０分
To Next Page
Loading...
