Roland XC-540 - Correcting Misalignment for Printing or Cutting; Correcting for Misalignment in Bidirectional Printing

100
Chapter 6 Feature Reference
6-7 Correcting Misalignment for Printing or Cutting
Correcting for Misalignment in Bidirectional Printing
Procedure
1. Print a test pattern.
➊
Press .
Press
.
➋
Press .
Press
to start printing.
2. Read the correction values from the test pattern.
3. Enter the correction values that you read.
➊
Press .
➋
Press .
Use
to set the correction values.
Press
to enable the setting.
4. Go back to the original screen.
Press .
Press
to go back to the original screen.
MENU
ADJUST BI-DIR
ADJUST BI-DIR
TEST PRINT
ADJUSUT BI-DIR
SIMPLE SETTING
SIMPLE SETTING
0
- 6
W 1346mm
SETUP SHEET
ROLL
Test pattern
Simple
Choose the value that pro-
duces the least misalignment.
Correction-value
scale
Current correc-
tion value