110
Chapter 6 Feature Reference
6-8
Setting How the Media Heating System Operates
Switching Off the Preheater, Print Heater, or Dryer
Procedure
➊
Press twice.
Use
to select the device.
Press
several times to select "OFF."
Press
to enable the setting.
➋
Press .
Press
to go back to the original screen.
Description
This makes the temperature settings for the media heating system (preheater, print heater, and dryer), as well as
switching these devices on or off. When this is set to "OFF," these devices do not operate at all.
You can also make these settings on the computer. When you've made the settings on the computer, the computer's
settings take precedence and the printer's settings are ignored.
Default Setting
[PRE] (preheater): 35˚C (94˚F)
[PRINT] (print heater): 35˚C (94˚F)
[DRYER]: 50˚C (122˚F)
W 1346mm
SETUP SHEET
ROLL
PRE 35
OFF35
To Next Page
Loading...
