Roland XC-540 - Replacing the Blade

5-4 Replacing Consumable Parts
74
Chapter 5 Maintenance and Adjustment
Replacing the Blade
If the blade becomes dull, replace it with the included replacement blade.
CAUTION
Be sure to perform operations as specified by these instructions, and never touch
any area not specified in the instructions.
Sudden movement of the machine may cause injury.
CAUTION
Never touch the tip of the blade with your fingers.
Doing so may result in injury.
1. Enter the blade replacement mode.
➊
Press .
Press
several times.
➋
Press .
Press
.
➌
Press .
Press
several times.
➍
Press .
The cutting carriage moves to a location permitting blade replacement, and
then the screen shown in the figure appears.
➎
Open the front cover.
Preparations are complete when this screen appears.
2. Replace the blade.
➊
Remove the blade holder.
MENU
SUB MENU
FINISHED?
MAINTENANCE
REPLACE KNIFE
Blade holder
Loosen the screw.
SUB MENU
MAINTENANCE
OPEN FRONT
COVER
NOW PROCESSING..