5-4 Replacing Consumable Parts
75
Chapter 5 Maintenance and Adjustment
➋
Remove the old blade.
➌
Install a new blade.
➍
Reinstall the blade holder.
If installed without supporting the screw in this way, cutting quality
may become poor.
➎
Tighten the screw.
Tug the blade holder upward to make sure it does not come loose.
3.
Quit the [REPLACE KNIFE] menu.
Close the front cover, and press .
New blade
Pin
Blade holder
Screw
Screw
Blade holder
Old blade
Press this pin
Insert until the collar is
flush with the surface.
To Next Page
Loading...
