Roland XC-540 - Performing Feed Correction to Alleviate Horizontal Bands and the Like

6-7 Correcting Misalignment for Printing or Cutting
103
Chapter 6 Feature Reference
Performing Feed Correction to Alleviate Horizontal Bands and the Like
Procedure
1. Print a test pattern.
➊
Press .
Press
several times.
➋
Press .
Press
to start printing.
2. Check the test pattern you printed.
3. Enter the correction value.
Press .
Press
.
Use
to make the setting for the correction value.
Press
to enable the setting.
4. Go back to the original screen.
Press .
Press
to go back to the original screen.
W 1346mm
SETUP SHEET
ROLL
MENU
CALIBRATION
CALIBRATION
TEST PRINT
SETTING
0.00%
0.15%
Gap present Correct results Overlap
Reduce the value.
Test pattern
Correction-value
adjustment
± 0 Increase the value.