Roland XC-540 - Chapter 5: Maintenance and Adjustment

4-2 Using the Take-up System
59
Chapter 4 Operation of the Media Take-up System
3. Make the settings for the take-up unit.
➊
Make the setting for the AUTO switch on the take-up unit.
Take-up with outward curl
Take-up with inward curl
When you begin take-up, take care to ensure that the end of the media does not become rolled or creased.
➋
Press .
➌
Making the setting is complete when this screen appears.
Ensure there is
no slack.
Ensure there is
no slack.
CHECK
TAKE-UP SETTING
W 1346mm