5-3 Cleaning the Heads Using the Cleaning Kit
69
Chapter 5 Maintenance and Adjustment
1.
Change to the print-head manual-cleaning mode.
➊
Press .
Press
several times.
➋
Press .
Press
.
➌
Press .
➍
Press .
Open the front cover and remove the maintenance cover.
➎
Close the front cover.
Press
.
The print-head carriage moves to the left side of the machine, and
then the screen shown in the figure appears.
➏
Open the front cover.
Preparations are complete when this screen appears.
➐
Touch the location shown in the figure to discharge any
static electricity.
MENU
SUB MENU
SUB MENU
MAINTENANCE
MAINTENANCE
CLEANING
FINISHED?
Maintenance cover
OPEN MAINTE-
NANCE COVER
NOW PROCESSING..
OPEN FRONT
COVER
To Next Page
Loading...
