Maintenance
Edition BE210202
03.2022
Rondostar 5000
Operating manual
118
7 Maintenance
7.1 General information for machine maintenance
Authorised use also means that users must follow all instructions pre-
scribed by the manufacturer in regard to operation, maintenance and
service.
Before beginning any repair, service or cleaning work on the machine,
the power supply to the machine must be interrupted (pull out the
mains plug).
Operation when any of the safety elements is out of order is prohibited.
Defective safety elements must be replaced with new original parts
immediately.
Machine parts located in the dough processing area, and whose sur-
face coating becomes worn (e.g. chrome plating, colour, plastic), must
be replaced.
For professional servicing and maintenance of the machine, we rec-
ommend taking out an appropriate maintenance contract. Your author-
ised dealer will be pleased to provide you with details of the different
options.
Cutting rollers may only be lowered when the safety guard is closed.
Due to the risk of injury at the sharp edges, cutting rollers must be re-
placed carefully and correctly. Wear suitable protective gloves to pre-
vent injuries. Cutting rollers that are outside the cutting point must be
placed in the holding brackets beneath the machine table.
3
8
10
11
12
36
37
To Next Page
Loading...
