Rondo Rondostar 5000 Basic - Unloading the Pallet with a Crane; Unloading the Pallet with a Forklift Truck

Transporting, setting up, connecting, dismounting and storing the device
Edition BE210202
03.2022
Rondostar 5000
Operating manual
29
2.3.1 Unloading the pallet with a crane
1. Attach lifting straps as shown in the illustration.
2. Lift the machine.
(Pay attention to the centre of gravity, can tip!)
3. Deposit machine on a flat, stable surface.
2.3.2 Unloading the pallet with a forklift truck
Precondition:
Fork height is < 7.5 cm.
Set the forks as wide apart as possible.
1. Lift the machine as shown in the illustration.
(Pay attention to the centre of gravity, can tip!)
2. Deposit machine on a flat, stable surface.
Desirable fork position