Rondo Rondostar 5000 Basic - Moving the Machine; Mounting the Ship Feet [Option SSH670**.*, SSH672***.*]

Transporting, setting up, connecting, dismounting and storing the device
Edition BE210202
03.2022
Rondostar 5000
Operating manual
48
2.5.16 Moving the machine
The machine must be set up on a level, even floor surface. Travelling
over gradients > 10° is not permitted. The machine must be locked
during operation.
1. Lift on the operating side using the guard tube (1):
The front transport roller drops down.
The machine can now be easily moved on the rollers.
At the desired location:
• Lift the machine slightly using the guard tube (1).
• Press the pedal (2) for the front transport roller with your foot.
• Lower the machine gently to the ground, do not let it “fall”.
2.5.17 Mounting the ship feet [option SSH670**.*, SSH672***.*]
1. Mount the ship feet (1) on the substructure (2)
2. Fasten the ship feet to the floor
3. Tighten the screws
1
2
1
2