Rondo Rondostar 5000 Basic - Safety Information; Transporting, Setting Up, Connecting, Dismounting, and Storing the Device

Table of contents
Edition BE210202
03.2022
Rondostar 5000
Operating manual
9
1 Safety information 15
1.1 Explanation of symbols 15
1.2 Explanation of symbols 16
1.3 Personnel 18
1.3.1 Personnel requirements 18
1.3.2 Unauthorised persons 18
1.3.3 Personal protective equipment 18
1.3.4 Conversion 19
1.4 Area of application 19
1.5 Safety elements 20
1.5.1 Safety guards 20
1.6 Safety instructions and information that must be observed 20
2 Transporting, setting up, connecting, dismounting and storing the device 27
2.1 Delivering the machine 27
2.2 Transporting the machine 27
2.3 Unpacking the machine 28
2.3.1 Unloading the pallet with a crane 29
2.3.2 Unloading the pallet with a forklift truck 29
2.3.3 Unloading the pallet with a manual pallet jack 30
2.4 Space requirement 35
2.5 Setting up the machine 36
2.5.1 Mounting the undertables [SSH673***.*] 36
2.5.2 Mounting the machine tables 37
2.5.3 Mounting gas springs: rigid substructure [SSH673***.*] 38
2.5.4 Mounting the table supports [SSH670**.*, SSH672***.*] 39
2.5.5 Tensioning the conveyor belts: Belt release [variant] 41
2.5.6 Tensioning the conveyor belts: Quick-release belt [variant] 42
2.5.7 Mounting the dough catch pans 43
2.5.8 Folding up the machine table [SSH670*.*/ SSH672*.* / SSH672*C.*] 43
2.5.9 Folding up the machine table: Cutomat [SSH672**C.* / SSH673**C.* ] 43
2.5.10 Folding down the machine table: Cutomat [SSH672**C.* / SSH673**C.* ] 44
2.5.11 Mounting the flour container [variant SSH670**.*] 44
2.5.12 Mounting the automatic flour duster
[variant SSH670**.*][standard SSH672***.*, SSH673***.*] 45
2.5.13 Mounting the automatic reeling device [SSH67* 7H*.*] 46
2.5.14 Interconnected operation with PTT150/PTT250 transfer table 47
2.5.15 Interconnected operation with make-up line/donut line 47
2.5.16 Moving the machine 48
2.5.17 Mounting the ship feet [option SSH670**.*, SSH672***.*] 48