Rondo Rondostar 5000 Basic - Mounting the Scraper; Checking for Wear; Automatic Reeling Device: Check Seal Rings

Maintenance
Edition BE210202
03.2022
Rondostar 5000
Operating manual
128
7.4.6.3 Mounting the scraper
1. To remount the scraper, follow the removal instructions in reverse
order.
7.4.7 Conveyor belt
7.4.7.1 Checking for wear
• If the conveyor belts are worn, contact customer service.
• If slight signs of wear are visible at the edges, the conveyor belt is
skewed. Adjust the belt release.
7.4.8 Automatic reeling device: Check seal rings
[SSH67*7H*.*]
Check seal rings (1). Arrange replacement by customer service if nec-
essary.
1