Safety information
Edition BE210202
03.2022
Rondostar 5000
Operating manual
21
Authorised use also means that users must follow all instructions pre-
scribed by the manufacturer in regard to operation, maintenance and
service.
Work on the electrical equipment of the machine, particularly profes-
sional installation of the mains plug, may only be carried out by quali-
fied personnel who are familiar with the safety instructions. The maxi-
mum permitted fuse of the mains is specified in the enclosed electro
circuit diagram or on the sign “Electrical connected loads”.
The machine may only be connected to the electric power supply with
the mains plug! No permanent installation, e.g. by means of screw
clamps, is permitted. The mains plug is used as a disconnecting de-
vice, and must always be clearly visible and easily accessible.
Any unauthorised changes made to the machine, in particular to the
safety devices, will automatically exclude any liability on the part of the
manufacturer for accidents or damage sustained as a result of such
changes.
Protective covers over the electrical controls and mechanical moving
parts may only be removed by professionally qualified personnel and
must be remounted before the machine is put back into operation.
The machine may only be connected to the power supply using the
plug once it has been fully assembled. In particular, operation with the
machine tables disassembled is prohibited.
Before beginning any repair and service work on the machine, the
power supply to the machine must be interrupted (pull out the mains
plug).
Safety elements may not be adjusted, electrically overridden or dis-
mantled.
3
4
5
6
7
8
9
To Next Page
Loading...
