Safety information
Edition BE210202
03.2022
Rondostar 5000
Operating manual
24
Clean the machine thoroughly after every use. A machine that is not
thoroughly cleaned may present a health hazard for consumers.
All assembly and disassembly work must be carried out by three peo-
ple.
Defective cables and mains plugs must be replaced immediately by
qualified personnel.
Non-ionising radiation is not intentionally generated, but is technically
only given off by the electrical equipment (e.g. by electric motors). In
addition the machine has no strong permanent magnets. By keeping a
safe distance of 30 cm (distance from source field to implant), interfer-
ence with active implants (e.g. pacemakers, defibrillators) can be ex-
cluded with a high degree of probability.
Before beginning any cleaning work, stop the machine and interrupt
the power supply to the machine (pull out the mains plug). Exceptions:
• Cleaning the rollers in intermittent operation.
• Cleaning the top of the conveyor belt in continuous operation
If an installation is connected to a network, the operating company is
responsible for the network security and network infrastructure.
27
28
29
30
31
32
To Next Page
Loading...
