Roth EnergyLogic Touchline/wireless - Page 76

User Manual Roth EnergyLogic Touchline/Wireless
Parameter descriptions
76 P100011294 E
P-30
Parameters for all wire-
less room thermostats
Parameter Description
P-31 Set increment for room temperature setpoint adjustment.
P-32 Set temperature for frost protection function.
P-33 Set unit for temperature.
P-34 Set dead-zone for change-over between heating and cooling.
P-35 Change service code for service menu.
P-36 Change access code for public spaces.
P-37 Activate or deactivate "summer-/wintertime".
P-38 Deactivate or activate automatic time settings.
P-40
Parameters for individual
wireless room thermo-
stats
Parameter Description
P-41 Set wall temperature correction of wireless room thermostat.
P-42 Set floor temperature correction of wireless room thermostat
with integrated IR-sensor.
P-43 Set maximum floor temperature of wireless room thermostat
with integrated IR-sensor.
P-44 Set reduction of room temperature for "Eco" function.
P-45 Activate or deactivate cooling lock and/or bypass, e.g. for a
heat pump.
P-46 Activate or deactivate "setpoint sharing within one zone"
P-47 Activate or deactivate lock for public spaces or hotels.
P-48 Activate or deactivate master function of a wireless room
thermostat.
P-50
Plant and topology relat-
ed parameters
Parameter Description
P-51 Set priorities for change-over of heating/cooling and configure
output for heating/cooling or burner start.
P-52 Activate or deactivate "optimized time program".
P-53 Set wireless communication between the wireless connection
modules.