Roth EnergyLogic Touchline/wireless - Page 93

User Manual Roth EnergyLogic Touchline/Wireless
Parameter descriptions
P100011294 E 93
Parameter Description
P-52 (continued)
Operation
► Press sensor button . The display shows 0.
► Press sensor button
or , to select option 0 or 1.
► Select one of the following options:
– Press sensor button , to save the changed settings. The display shows the
next parameter P-53.
– Press sensor button , to interrupt the procedure. The display shows the se-
lected parameter.
P-53 Set communication between the wireless connection modules.
Defines whether communication between the wireless connection modules is im-
plemented wirelessly. Up to 5 wireless connection modules can be combined.
● Factory settings: Option "0"
● Options:
– 0: Wireless communication active
– 1: No function
– 2: Communication between the wireless connection modules inactive
Operation
► Press sensor button . The display shows 0.
► Press sensor button
or , to select option 0 or 2.
► Select one of the following options:
– Press sensor button , to save the changed settings. The display shows the
next parameter P-51.
– Press sensor button , to interrupt the procedure. The display shows the se-
lected parameter.
► Press sensor button
. The display shows P-50.
Table 19: Service menu – P-50 "Plant- and topology related parameters"