Web-based Configuration Guide System Settings
169
Note
A least one OID rule must be configured for a view. Otherwise, an alarm message will
appear.
(3) Click OK.
2. Configuring v1/v2c Users
Overview
When the SNMP version is set to v1/v2c, user configuration is required.
Note
Select the SNMP protocol version, and click Save. The corresponding configuration
options will appear on the View/Group/Community/User Access Control page.
Configuration Steps
In Network mode, choose System > SNMP > View/Group/Community/Client
Access Control > SNMP v1/v2c Community Name List
(1) Click Add in the SNMP v1/v2c Community Name List pane.
To Next Page
Loading...
