Web-based Configuration Guide System Settings
180
Select none for a notify view.
Group name: group
Security level: authentication and encryption
Authentication protocol/password: MD5/Ruijie123
Encryption protocol/password: AES/Ruijie123
For SNMP v3, the default port number is 161.
Configuration Steps
(1) On the global configuration interface, select v3, and change the port number to 161.
Set other settings to defaults. Then, click Save.
(2) Add a view on the View/Group/Community/Client Access Control interface.
a Click Add in the View List pane.
b Enter the view name and OID in the pop-up window, and click Add Included Rule.
c Click OK.
To Next Page
Loading...
