Hydraulic pressure accumulator and anti-shock valve for the front power-lift
The front power-lift is equipped with a pressure accumulator and related anti-shock valve permitting a better hydraulic
system performance and a reduced front axle strain to be respectively obtained.
Fig. 3 - Operating diagram.
Fig. 4 - Damping unit parts.
A - anti-shock valve
B - accumulator
vehicle
front hydraulic power-lift
A - Front hydraulic lifting cylinders (nº 2)
B - Oil pressure accumulator
volume liter 0,700
nitrogen preloading pressure bar 130
peak operating pressure bar 250
C -
Anti-shock valve
D - Lowering speed control valve
E - Load holding valve (allows oil to be held internally of cylinders with
implements in raised position during transit).
59
5
283
www.maskinisten.net
www.classicmachinery.net
To Next Page
Loading...