Samsung DCS-816 - MMC: 406 TRUNK RING ASSIGNMENT

SAMSUNG Programming
DCS-816 February, 1999
MMC 406 (Page 1 of 2)
MMC: 406 TRUNK RING ASSIGNMENT
DESCRIPTION:
Enables ringing to a specific station or a group of stations or an auto attendant
when incoming calls are received. This MMC controls both day and night
locations.
DEVICE DEFAULT DN
Station 201–216
Station group 500–509
AA 38x
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL (trunks only)
ACTION DISPLAY
1. Press TRSF 406
Display shows
[701] TRK RING
D:500 N:500
2. Dial trunk number (e.g., 704)
OR
Use UP or DOWN to scroll through trunk
numbers and press the RIGHT soft key to
move the cursor
[704] TRK RING
D:500 N:500
3. Dial station number or station group number
for day (e.g., 205)
OR
Press UP or DOWN key to select station
number or station group number and press
RIGHT soft key to move cursor
[704] TRK RING
D:205 N:500
[704] TRK RING
D:205 N:501
4. Dial station number or station group number
for night (e.g., 501)
OR
Press UP or DOWN key to select station
number or station group number and press
RIGHT soft key to move cursor
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC