SAMSUNG Programming
DCS-816 February, 1999
MMC 304 (Page 1 of 2)
MMC: 304 ASSIGN STATION/TRUNK USE
DESCRIPTION:
Allows trunks the ability on a per–station basis to answer incoming calls, to dial
out or to do both. If a station is set to NO Dial, the station will not have the ability
to place a call. If the station is set to NO Answer, the station cannot answer an
incoming call.
NOTE
MMC 406 Trunk Ring Assignment overrides this MMC for the Answer option.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 304
Display shows
[201] USE [701]
DIAL:YES ANS:YES
2. Dial the station number (e.g., 205)
OR
Press UP or DOWN key to select station and
press RIGHT soft key
[205] USE [701]
DIAL:YES ANS:YES
3. Dial the trunk ID number (e.g., 704)
OR
Press UP or DOWN key to select trunk and
press RIGHT soft key
[205] USE [704]
DIAL:YES ANS:YES
4. Press UP or DOWN key to select YES/NO
option
OR
Dial 1 for YES or 0 for NO and press RIGHT
soft key to move cursor to ANS option
Press UP or DOWN key to select YES/NO
option
OR
Dial 1 for YES or 0 for NO and press RIGHT
soft key to return to step 2
[205] USE [704]
DIAL:NO ANS:YES
[205] USE [704]
DIAL:NO ANS:NO
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: DIAL = Yes ANS = Yes
To Next Page
Loading...
