SAMSUNG Programming
DCS-816 February, 1999
MMC 400 (Page 1 of 2)
MMC: 400
CUSTOMER ON/OFF PER TRUNK
DESCRIPTION:
Assigns several options (listed below) on a per–trunk basis.
NOTE
1A2 Emulation means that a third party can be joined on an existing trunk conversation by pressing
the DTS key for the line on their keyset.
OPTIONS
0 1A2 EMULATION Trunk override call (NO PRIVACY)
1 TRK INC DND Allows trunk to override DND (DIL)
2 TRK FORWARD Allows trunk to be forwarded
3 LCR ALLOW Allows trunk to enable LCR feature
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 400
Display show
[701] TRK ON/OFF
1A2 EMULATE:OFF
2. Dial trunk number (e.g. 704)
OR
Press UP or DOWN key to select trunk
OR
Press ANS/RLS for all trunks and press
RIGHT soft key to move cursor to options
[704] TRK ON/OFF
1A2 EMULATE:OFF
[ALL] TRK ON/OFF
1A2 EMULATE :?
3. Dial option number from above list (0–3)
(e.g. 2)
OR
Press UP or DOWN key to select option and
press RIGHT soft key to move cursor
[704] TRK ON/OFF
TRK FORWARD :ON
4. Dial 1 for ON or 0 for OFF
OR
Press UP or DOWN key to select ON/OFF
and press RIGHT soft key to return to step 2
[704] TRK ON/OFF
TRK FORWARD: OFF
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next
MMC
To Next Page
Loading...
