Samsung DCS-816 - Station On;Off

SAMSUNG Programming
DCS-816 February, 1999
MMC 110 (Page 1 of 2)
MMC: 110 STATION ON/OFF
DESCRIPTION:
Allows the system administrator to set any of the keyset features listed below.
0 AUTO HOLD Automatically places an existing C.O. call on hold if a
CALL button, trunk key or trunk route key is pressed
during that call.
1 AUTO TIMER Automatically starts the stopwatch timer during a C.O.
call.
2 HEADSET USE When ON, this feature disables the hookswitch allowing
a headset user to answer all calls by pressing the
ANS/RLS button.
3 HOT KEYPAD When ON, this feature allows the user to dial directory
numbers without having to first lift the handset or press
the SPK button.
4 KEY TONE Allows the user to hear a slight tone when pressing
buttons on keyset.
5 PAGE REJOIN Allows the user to hear the latter part of page
announcements if keyset becomes free during a page.
6 RING PREF. When OFF, requires the user to press the fast flashing
button to answer a ringing call after lifting the handset.
7 CALL COST If enabled (ON), LCD shows real–time call cost based
on Metering Pulses arrived.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 110
Display shows
[201] STN ON/OFF
AUTO HOLD :OFF
2. Dial station number (e.g., 205)
OR
[205] STN ON/OFF
AUTO HOLD :OFF
Press UP or DOWN to select station and press
RIGHT soft key to move cursor
OR
Press ANS/RLS for ALL
[ALL] STN ON/OFF
AUTO HOLD :?