Samsung DCS-816 - Customer On;Off

SAMSUNG Programming
DCS-816 February, 1999
MMC 210 (Page 1 of 2)
MMC: 210 CUSTOMER ON/OFF
DESCRIPTION:
Allows the system administrator to set in system features. Each system option
has a corresponding dialling number, as listed below. All options toggle ON/OFF.
0 DISA PSWD Determine whether outside customers are required to
enter DISA password (Yes=ON, No=OFF).
1 LCR ENABLE Enables LCR feature in the system.
3 PERI UCD SET Periodic UCD information provider. Enables UCD
statistics data on a per UCD group basis to print out
on the I/O port which has been set as SMDR or UCD
REPT in real time (every 10 seconds). This allows
extended manipulation of the information by an
external third–party–providedsoftware package.
4 CID CODE INS Allows the digit ‘ 1’ to be automatically inserted for a
toll call.
5 DISA MOH An additional option that can be presented to outside
DISA callers: a variable indication provided by an
MOH source instead of a fixed DISA dial tone.
6 TRANSFER MOH Callers who have been transferred from an extension
or ACD group or AA group will hear MOH, until
answered by the called extension, instead of transfer
dial tone.
7 DSP SSPDNAME LCD displays programmed name of SYSTEM SPEED
bin (in MMC 706) if it has been programmed; if not, it
shows digits programmed in MMC 705 even if this is
set to ON.
8 DID BSY ROUT Busy DDI call can be routed to an assigned
destination, in MMC 406, before the call is dropped
out.
9 DID NOT ROUT Not used DDI call can be routed to an assigned
destination, in MMC 406, before the call is dropped
out.
10 ALL PICK UP Independent pick up group, can pick up all calls.
11 ARD TONE CHK When system detects CO BUSY TONE from Central
Office, returns to autoredial state.
13. VPN ENABLE Allows use of VPN (Virtual Private Network) feature
linked with network.