SAMSUNG System Administration and Special Features Guide
DCS-816 February, 1999
3 - 12
press the right soft key to move the cursor
6. Enter the messages using the procedure in Program
Station Names (above) and press the right soft key to
[205] ALM REM (2)
TAKE MEDICATION
return to step 2
7.
Press TRSF to store and exit programming
OR press SPK to store and advance to the next
program
3.13 MANAGING KEY ASSIGNMENTS
You can view station key assignments and add extenders to some of the programmable
keys for easy one-touch operation of frequently-used features.
An extender is a number that makes an otherwise general soft key very specific. Adding
the digit 4 to a PAGE key defines this key for paging zone four. Adding 205 to a directed
pickup key defines this key as pickup for extension 205 only. The soft key must already be
assigned by the installing technician. Adding extenders allows one-touch operation for that
feature.
Use this program to assign extenders to the following soft keys:
KEY EXTENDER
BOSS Boss and Secretary (1-4)
DP Direct Pickup (telephone no.)
DS Direct Station Select (station no.)
FWD Call Forward (0-5)
GPIK Group Pick-Up (01-08)
IOG In/Out of Group (500-509)
MMPG Meet Me Page (0-5, Q)
PAGE Page (0-5, Q)
SPD Speed Dial (00-49, 500-799)
PSMG Programmed Message (01-20)
DIR SYS(0), PERS(1) or STN(2)
SP UCD Supervise (UCD group no.)
PROGRAM KEYS
UP & DOWN Select the extension number.
KEYPAD Used to enter extender codes.
HOLD Used to clear the displayed data.
Open customer programming and follow the instructions below.
To Next Page
Loading...
