SAMSUNG Programming
DCS-816 February, 1999
MMC 300 (Page 1 of 2)
MMC:300
CUSTOMER ON/OFF PER STATION
DESCRIPTION:
Allows the following features to be enabled on a per–station basis.
ACCESS DIAL Determines whether a user can select a trunk or trunk
group by dialling its directory number (DN). This selection
should be turned OFF when using LCR.
MICROPHONE Allows all keysets to be used in the speakerphone mode.
OFF–HOOK RING Allows a short burst of ring tone to indicate another call.
SMDR PRINT When the station is set for no C.O. calls to and from this
station, the station will not print on SMDR. This includes
transferred calls or calls picked up from hold or park.
TGR ADV.TONE When this feature is set to ON, a warning tone will be
heard each time LCR advances to the next route.
VMAA FORWARD When this feature is set to ON, it allows calls to be
forwarded to voice mail.
STN CALL PRT Allows print out station to station call.
FWD DLY USE Set FWD No Ans. Destination in MMC 102 but do not
enable the feature (alternatively use code 603 + stn no.
then 600 to cancel the feature), when a call is presented
to this station and the Forward no answer timer expires,
the call will overflow to the station set as the Forward no
answer destination.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 300
Display shows
[201] CUS.ON/OFF
ACCESS DIAL :ON
To Next Page
Loading...
