Samsung DCS-816 - Page 71

SAMSUNG Programming
DCS-816 February, 1999
MMC 300 (Page 2 of 2)
2. Dial station number (e.g., 205)
OR
Press UP or DOWN to select station
OR
Press ANS/RLS for all and press RIGHT soft
key to move cursor
[205] CUS.ON/OFF
ACCESS DIAL :ON
[ALL] CUS.ON/OFF
ACCESS DIAL :ON
3. Press UP or DOWN to select feature and
press RIGHT soft key to move cursor
[ALL] CUS.ON/OFF
ACCESS DIAL :ON
4. Dial 1 for ON or 0 for OFF
OR
Press UP or DOWN to select and press
RIGHT soft key
[ALL] CUS.ON/OFF
ACCESS DIAL :OFF
5. Press LEFT soft key to return to step 2
Press RIGHT soft key to return to step 1
OR
Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: STN CALL PRT : OFF
FWD DLY USE : OFF
Other features set to ON
RELATED ITEMS: LCR programming